EARTHBOND® Crack & Joint Sealants

Silicone Cold Pourable Crack Filler

Cold Applied Crack Sealant, no-heat silicone sealant for asphalt concrete pavement crack sealing & road maintenance
Brand:
EARTHBOND®
Dosage:
10 linear meters for typical cracks. Actual consumption depends on crack width and depth.
Application:
Seal cracks in asphalt and concrete pavements; widely used on highways, parking lots, sidewalks and airport pavements.
Get a Quote
Technical Data
Product Video

See It in Action

Click here to learn more about Go Green product.

Product Profile

Go Green Silicone Cold Pourable Crack Filler

It is a single-component, self-leveling, low-modulus,  highly elastic silicone sealant. It combines the elastic properties of hot-pour sealants and adhesives. Widely used for sealing cracks and expansion joints across airport runways, highways, asphalt or concrete pavements, tunnels, ports, roofs and basements, offering high adhesive strength. 

Primary use:

  • Go Green cold pourable crack filler is specially designed for filling cracks on asphalt and  concrete pavement surfaces. Tests show that one kilogram of sealant can fill  approximately 10 linear meters of typical cracks (defined as cracks less than 1 cm in  width). The actual consumption depends on the crack width and depth.

  • This fast-curing, oil-based material offers excellent displacement resistance and  waterproof performance. It cures by reacting with moisture in the air and remains highly  weather-resistant. It does not flow at high temperatures and does not crack at low  temperatures. Once cured, the bond between the sealant and the crack surface remains  intact even after rain or sudden temperature changes, and it retains long-term elasticity.

  • Custom colors are available upon request to match various pavement colors for  seamless crack repair.

  • Go Green cold pourable crack filler is a new type of road maintenance material ideal for timely crack repairs on both asphalt and concrete surfaces. Compared to traditional hot-pour  sealants, this product requires no heating, offers faster application, quicker reopening to  traffic, and lower maintenance costs.

Product Advantages:

  • Weather resistance from -60°C to 150°C; Suitable application temperature from -10°C to 50°C, with stable performance.
  • Excellent adhesion and waterproof properties.
  • Unique siloxane molecular structure offers a much longer lifespan than traditional organic materials like asphalt or polyurethane.
  • Superior UV resistance and aging performance.
  • High elasticity and excellent tensile recovery.
  • Outstanding resistance to acids, alkalis, and salts; unaffected by deicing agents,  engine oils, or other solvents.
  • Single-component, self-leveling design for easy application.
  • Safe, non-toxic, skin-friendly, and environmentally friendly.

Notes:

  • Avoid application in rainy or snowy weather. 
  • This is a single-component sealant that begins to cure upon air contact. Use the materials promptly after opening. If unused, reseal tightly. Before reusing, remove any cured skin on the surface.
  • The sealant should be applied and finished within 60–90 minutes after opening. In hot or humid weather, shorten the working time as the material thickens over time. 
  • After full pavement application, inspect the surface within a few days. Refill areas with insufficient sealant. If bubbling is observed, it is likely caused by trapped moisture vaporizing. Cut a small slit to release the vapor and reapply sealant as needed. 
  • Drying time: 0.5–2 hours, depending on local climate conditions.

Technical Specification

No.

Testing Item

Testing Standard

Result

Assessment 

1

Appearance

Delicate, uniform paste,  without bubbles, crust  and gel

Comply with standard regulations

Standard

2

Density, g/cm3

Specified value±0.1

1.4

/

3

Sag

Vertical, mm

≤3

0

Standard

Leveling (L)

Smooth and flat

Smooth and flat

4

Surfacing drying time, h

≤3

0.7

Standard

5

Extrusion, ml/min

≥80

445

Standard

6

Elastic recovery rate, %

≥80

93

Standard

7

Tensile  modulus

23℃

>0.4

0.55

Standard

-20℃

>0.6

0.75

8

Calming Adhesion

No damage

No damage

Standard

9

Adhesion after UV irradiation

No damage

No damage

Standard

10

Cold control-adhesion after hot pressing

No damage

No damage

Standard

11

Adhesion after immersion in  water

No damage

No damage

Standard

12

Quality loss rate

≤10

3.1

Standard

Application Instructions

Crack Cleaning 

Ensure all cracks are clean before application. Remove dust, debris, and vegetation thoroughly, as these will affect adhesion and penetration. For old cracks, be sure to remove residual sealants, especially if they are of different material types, to ensure optimal bonding.

Application Process 

For cracks 4mm–15mm wide, we recommend using a caulking gun. 
For cracks 15mm–30mm wide, a caulking gun or professional equipment can be used. 
For wider and deeper cracks, insert a backer rod (3–5mm wider than the crack) or fine sand before sealing, leaving a space of 0.6–1cm from the surface for sealant application.

Package:  2.5kg per bag 25kg per steel bucket 

Storage: Store in a ventilated, cool, and dry environment. Shelf life is 12 months.

Related Products

You May Also Need

Explore More Products
Contact Us

Road Maintenance Solutions Made for Your Project

Share your project information and specific requirements. Our team will contact you promptly to provide a suitable road maintenance solution.

    We will respond with specifications, certificates and a formal quotation. Fields marked * are required.
    Address

    12F, YongYe Building, No.2240 South Pudong Road. Pu Dong New District, Shanghai, P.R.China.

    WhatsApp QR code

    WhatsApp

    WeChat QR code

    WeChat