EZROAD® Fog Seal Treatments

Sand Mix Driveway Sealer

It is a ready-to-use, anti-slip asphalt surface treatment that restores pavement appearance, seals fine surface defects, and improves skid resistance while extending pavement service life.
Brand:
EZROAD®
Form & Package:
Black sand slurry, 20kg per drum
Application:
Asphalt roads, highways, parking lots, driveway preventive maintenance
Get a Quote
Technical Data
Product Video

See It in Action

Click here to learn more about Go Green product.

Product Profile

Enhances Skid Resistance, and Extends Road Service Life

Go Green EZROAD Sand Mix Driveway Sealer is a new type of high-performance black-bright ultra-micro finish material. The high-performance dual-mode emulsified asphalt is used as the cementitious material, the super black anti-skid material is used as the aggregate, and the liquid mixture formed by adding super black modifier, super black wear-resistant filler, regenerant, etc., can be directly sprayed for construction at room temperature. The ultra-fine surface material has the characteristics of rapid demulsification and high wear resistance, which can effectively supplement the scattered pavement, missing asphalt and fine aggregate, and reduce the frequency of loose and aging pavement problems. At the same time, the anti-skid performance of the pavement is enhanced, water disasters are avoided, and the purpose of protecting the pavement structure and prolonging the service life of the pavement is achieved. It is a cost-effective preventive maintenance measure. 

Solution Overview

Application

It is suitable for preventive maintenance of various asphalt pavements such as highways, national and provincial trunk roads, municipal roads and facilities, airports, bridges, etc., as well as the repair of pavement appearance and function.

Key Advantages

Construction:

Small areas can be manually scraped or constructed with real stone paint equipment, and large areas can be constructed with spray trucks. Calculate the spraying amount according to the road conditions, put the mixture containing the sand mist seal layer into the spraying truck or the real stone paint equipment, adjust the equipment and control the dosage.

Request Support
View About Us
  • Before construction, the road surface should be cleaned, oil stains and loose parts should be removed to ensure that the road surface is dry and free of floating dust, and the spraying amount should be determined according to the road surface condition;
  • The road surface is smooth, dense, slightly water seeped, and slightly loose hemp surface: single-layer spraying is used, and the spraying amount is 0.9-1.2kg/m2 (finished material);
  • The surface of the pavement is rough, heavy water seepage, large porosity, heavy loose hemp surface and oil-poor: use double-layer spraying, the first layer spraying amount is 0.7-1.0kg/m2 (finished material), the second layer spraying amount is 0.5-0.8kg/m2 (finished material). The second coat should be applied after the first coat is dry (about 30 minutes).
  • The mixture can be applied via real stone paint spraying equipment, manual paving or dedicated spraying vehicles. After demulsification and curing, it forms a sand-bearing mist seal layer. Traffic can only be reopened once the pavement surface is dry and passes the paper non-stick test. Under ambient temperature above 15°C and relative humidity below 70%, the typical curing time is 2–3 hours.
Related Products

You May Also Need

Explore More Products
Contact Us

Road Maintenance Solutions Made for Your Project

Share your project information and specific requirements. Our team will contact you promptly to provide a suitable road maintenance solution.

    We will respond with specifications, certificates and a formal quotation. Fields marked * are required.
    Address

    12F, YongYe Building, No.2240 South Pudong Road. Pu Dong New District, Shanghai, P.R.China.

    WhatsApp QR code

    WhatsApp

    WeChat QR code

    WeChat